17
CHARGING AND BATTERY:
Your Jetson
®
Breeze has an external charger. The charging slot
opens by turning the cover and not trying to pull it off. Connect
the charger’s electric cable to an electrical outlet. Then connect
the charging cable to the scooter’s charging socket under the
footboard, on the right side at the rear. Always plug the charger into
the wall first before the device. The charger offers a charging status
on the top of the charger:
Charging Light Red
- Battery is charging.
Charging Light Green
- Charging is complete.
(Please note: Always plug the charger into the wall first before the
device. If the wall outlet doesn’t have power and you plug the
charger into the unit, it will light green, even if the battery is not full. So
always plug into the wall first to make sure there is power.)
Average charge time is 4-5 hours. Charge the battery only using tools
approved by Jetson
®
Breeze.
T
o maximize your scooter's battery performance, fully charge it for 9
hours, once a month, or after each use of twelve hours.
Unplug the Jetson
®
Breeze from the outlet before installing, removing
the battery or performing any maintenance. It is dangerous to use
the Jetson
®
Breeze when plugged into an AC outlet. Electrical shock
can cause serious injury and damage the scooter.
Do not attempt to open the battery. Do not insert anything in the
battery and do not attempt to open its case with any tool. Inserting
an object into openings or in the battery can cause electrical
shock, injury, burns or fire. Any attempt to open the battery case will
damage it and cause release of dangerous toxic substances.
Remove the battery and carry the Jetson
®
Breeze according to all
applicable local and national requirements.
OPERATION
