JETPRIME JP CJP 082H Installation Manual Download

Page: 4 / 5

INSTALLATION MANUAL (Issue n°00 - 20/05/2022)

Ref.

JP CJP 082H - YAMAHA XTZ690 TÉNÉRÉ 700

Assembly Instructions

CUSTOMER NOTES

Unplug the injector connectors and connect them

to the JP ECU using the black connectors, then plug

the other side of the bridge cable to the injectors

using the grey connectors.

Now is possible to connect the JP ECU to the PC

using the USB connector, to program it on your pre

ferences (follow Software User Manual for details,

available on the web site product page).

END

Summary of Contents for JP CJP 082H

Page 1: ...INSTALLATION MANUAL JP CJP 082H PROGRAMMABLE ECU Issue n 00 20 05 2022 YAMAHA XTZ690 TÉNÉRÉ 700 ...

Page 3: ...sensor placed on the right side under the display support and plug it to the JP ECU using the IAT connection cable than connect the other side of the bridge cable to IAT once again B Connect the T tap connector to any electrical positive wire like the key switch see sheet aside or the stop light switch see picture below as much as the negative wire to ground ...

Page 4: ...connectors and connect them to the JP ECU using the black connectors then plug the other side of the bridge cable to the injectors using the grey connectors Now is possible to connect the JP ECU to the PC using the USB connector to program it on your pre ferences follow Software User Manual for details available on the web site product page END ...

Page 5: ...r products Jetprime S r l Single Shareholder Company Via Eugenio Montale 1 41016 Novi di Modena Fraz Rovereto MO Italy Phone 39 059 672223 Email info jetprime it Jetprime is a registered trademark All rights are reserved Visit our store for more application for your bike www jetprimeshop it ...