8
Indication of battery status (Rev 1 or higher only)
Every time the unit is turned on and turned off, the battery LED will flash. Flashing 4 times means the battery is full; 3 times meaning
the battery is around 80%, 2 times meaning around 50%, and one time meaning less than 20%. Since the battery type is Ni-MH and It is
recommended that you charge your unit whenever you can place it back to the cradle and connect to USB power supply and that will
help to extend the battery life!
Preparing Jetpik for Use
Before using:
① P
lace one floss capsule into the nozzle (Note that Jetpik will not work properly without the floss capsule in position).
② Attach the nozzle to the handle.
When using the Jetpik cup, insert the quick connector of the extendable hose on the lower base of the cup to the water inlet
on the Jetpik handle and pull the tube to a comfortable length and fill the cup with water. (See below Figure 1)
When using in Travel Mode – Insert the quick connector on one side of the water supply tube to the Jetpik handle water inlet.
Use the spool of the water supply tube to clip the other end of the tube into a cup or bottle of water. Note – take care to
ensure that the tube remains fully immersed beneath the surface of the water.
(see below Figure 2)
