User manual: SingleBEC
-4-
To ensure safe and reliable operation of your SingleBEC, please ensure an adequate flow of
cooling air. Don´t connect any other power source to the regulator output (such as batteries or
an output of another regulator). Failure to comply with these conditions may result in
irreversible damage to the regulator!
It is not recommended to connect a servo with a larger load strength than 25 kg/cm to the output, or
mulitple servos with load strengths of more than 25 kg/cm in total. The value of 25kg/cm is just
approximate, it is advisable to meet all technical parameters, see the chapter Technical specifications
of Single BEC.
3.
Technical specifications of SingleBEC
Recommended input voltage
5.5 – 8.4 V
Maximum input voltage
24 V
Output Burst current
15 A
Output constant current
1 A
Operation temperature
- 20°C up to +75°C
Weight
5g
Dimensions
19 x 9.3 x 6.6 mm
4.
Warranty
For this product JETI model grants a warranty of 24 months from the day of purchase under the
assumption, that it has been operated in conformity with these instructions at recommended voltages
and that it has not been damaged mechanically. Warranty and post warranty service is provided first
by your JETI dealer and alternately by the manufacturer.
We wish you successful flying with the products of
JETI model s.r.o. Příbor
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at