JETI model duplex DC -24 II, User Manual

Page: 28 / 52

radio control system
EN
3.11.8 Aileron differential
Models with an asymmetrical
profile, such as this Cessna 150
example model, it is advisable to set
the aileron differentiation. In other
words, smaller deflections of the
ailerons down and more up. This
function can be set in
"Main
m e n u / F i n e t u n i n g / A i l e r o n
differential".
Note: after pressing the „F1" (Sym.) button, it is possible to change
the deflections of the right and left ailerons separately.
1. In the "Free Mixes" menu, create a new mix with the "F2" (+)
button
2. Assign the function "Rudder" to "From" and the function
"Direction" to "To". Use the "Master value" parameter to set the
ratio of the size of deviations between the steering wheel and the
rudder. Choosing a negative value (Master value) changes the
direction of the deflection of the front wheel relative to the
rudder.
1. In the "Main menu/Timers-Sensors/Voice output" menu, select
the switch that will activate the notification in the "Trigger
switch" item.
2. In the "Sensors & Variables" menu, enable the "Capacity" value
in the "Trigger" column.
3.11.9 Voice output
Report on the condition of the drive battery
After activating the selected switch, a message about the consumed
capacity of the main battery will be announced.
The transmitter allows you to assign messages to selected events
and values. For this model we chose:
27