Jet WMH JHS-1100, Operating Instructions And Parts Manual

Page: 3 / 16

3
•
Read and understand all warnings and operating instructions before attempting to use the winch
stacker.
•
Do not exceed rated load or load center capacity. Excessive load can cause tipping or loss of control.
•
Do not exceed load center capacity of stacker. Load center is measured horizontally from back of forks
or platform. Overall length of load must never be more than twice the load center capacity.
•
Do not allow anyone to sit or ride on fork, or enter area beneath forks.
•
Center of evenly distributed load should never exceed load center to ensure safe and balanced lifting.
•
Always keep fingers, hands and feet clear of forks and mast when lifting or lowering load.
•
Always center, stabilize, and secure load before raising forks or moving the stacker.
•
Do not allow more than half of load to extend beyond load center of stacker.
•
Always keep load close to mast.
•
Do not transport load in the raised position.
•
Use on level, smooth, finished floors only.
•
Do not use on uneven or sloping floors.
•
Always allow load to descend in a controlled, cautious manner.
•
Always use genuine factory replacement parts only.
•
Failure to comply with all of these warnings may result in tipping, loss of control and load, damage to
hydraulic stacker, personal injury and/or property damage.