3
WARNING
•
Read and understand all operating instructions before use.
•
The vehicle must be properly supported and blocked before starting repairs.
•
Use a transmission jack of the proper size and capacity to handle the anticipated load. This
jack is rated for a maximum load of 2,000 lbs. Do not overload beyond the jack’s rated
capacity. Overloading may cause damage to or failure of the jack.
•
Keep hands, fingers, and arms away from moving parts of the jack at all times.
•
Secure the load with the safety chain before lowering or moving the load.
•
Lower the load slowly and avoid sudden starts or stops that may cause the load to shift.
•
This jack is designed for use only on hard, level surfaces capable of sustaining the load.
Use on other than hard, level surfaces can result in jack instability and possible loss of
load.
•
Do not use the transmission jack if under the influence of alcohol or drugs.
•
This transmission jack is designed and intended for use by properly trained and
experienced personnel only. If you are not familiar with the proper and safe operation of a
transmission jack, do not use until proper training and knowledge have been obtained.
•
The use of this jack is limited to the removal, installation, and transportation in the lowered
position, of transmissions and differentials.
•
Failure to comply with all of these warnings may cause loss of load, damage to the jack,
and/or failure of the jack resulting in serious injury and/or property damage.
