Jet SSH, Operating Instructions And Parts Manual

Page: 6 / 12

6
General Specifications
The JET Material Support Stands, Models SSH and SSVH, are designed to handle heavy loads of flat or
round stock. Model SSH features a horizontal roller head that is used to support flat or rectangular
shaped stock. Model SSVH features a V-shaped roller head that is used to support round stock.
The height of the roller head is adjustable to accommodate the height of the machine worktable. The
roller head height is adjusted by loosening the clamping handle on the column, and moving the roller
head up or down to the desired height.
The horizontal stand has a 2 x 14-inch ball bearing roller head. The V-roller stand has two 2 x 5-inch ball
bearing rollers. The stand base and roller support are heavy duty castings.
Separate horizontal and V-roller heads are available for the support stand. Model SSHHO is the
horizontal roller head; Model SSVHO is the V- roller head.
Specifications
Stock Number.................................................................. 414121.................................................. 414122
Model Number ..................................................................... SSH..................................................... SSVH
Roller Type .................................................................. Horizontal ............................................. V-Shaped
Weight Capacity .................................................... 2000 Pounds..........................................2000 Pounds
Round Stock Capacity:
Minimum Diameter............................................
Not Applicable .................................................... 1 Inch
Maximum Diameter............................................ Not Applicable .............................................. 12 Inches
Height Range .................................................. 23 to 38.5 Inches.................................. 23 to 38.5 Inches
Length of Horizontal Roller .......................................... 14 Inches........................................
Not Applicable
Floor Area Required ...................................... 16.5 x 16.5 Inches................................. 16.5 x 16.5 Inches
Weight:
Assembled Stand ................................................... 44 Pounds............................................ 43 Pounds
Roller Head Only ................................................. 12.5 Pounds............................................ 12 Pounds
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier (Manufacturing) Inc., reserves the right to change specifications at
any time and without prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury!