background image

MIDI Features and Controls

Receiving CC messages will control the individual controls, knobs, and switches of the Revelation

CC #20 with any value of 0 thru 127 controls the Mix knob. 0 is the equivalent of having the 

knob turned completely counter-clockwise (100% dry mix) and 127 is like having the knob 

turned completely clockwise (100% wet mix). Sending a value of 64 is the equivalent of 

having the knob straight up at noon.

CC #21 with any value of 0 thru 127 controls the Decay knob

CC #22 with any value of 0 thru 127 controls the Cntrl 1 knob

CC #23

Any value between 0 & 63 turns the Bypass switch off

Any value between 64 & 127 turns the Bypass switch on

CC #24

Any value between 0 & 63 turns the Preset switch off

Any value between 64 & 127 turns the Preset switch on

CC #25 any value between 0 & 127 increments the Preset number

CC #26 any value between 0 & 127 decrements the Preset number

CC #27

Any value between 0 & 42 activates the Sky Blue algorithm

Any value between 43 & 85 activates the Ice algorithm

Any value between 86 & 127 activates the Yellow Sub algorithm

CC #28 any value between 3 & 124 activates CC Snapshot mode

This takes a snapshot of your current settings and stores it permanent memory at the 

appropriate preset location. An example would be to send CC #28 Value 3, this stores 

a preset in the 3rd slot and can be recalled anytime by sending PC #3

CC #29

Any value between 0 & 63 turns off Infinite Decay

Any value between 64 & 127 turns on Infinite Decay

(you can also exit Infinite Bloom with the foot switches as well)

Control Change Messages

Summary of Contents for Revelation Reverb V2.0






















Reviews: