Jet PRSWSH-1316PTL, User Manual

Page: 3 / 29

180714125800
2
2
Safety Warnings
General Safety Warnings
It is important you read
and understand the
instruction manual
before use and keep the
manual in a safe place
for future reference.
Safety precautions must
be observed to reduce
the risk of personal
injury when operating
this machine.
It is recommended you
complete formal training
on how to use your
equipment if you are
unfamiliar with any
aspect of the machine
or its use.
Do not expose yourself or others to
danger. Do not permit others to use this
machine unless they have read this
manual and are trained in its operation.
Do not operate if the machine is
damaged or is in an excessively worn
state. To reduce fire hazards keep the
engine and exhaust free of debris ,
leaves, or excessive lubricant. Do not
use any attachments or accessories with
the machine other than the ones
recommended by the supplier. Serious
injury to the operator or bystanders can
result as well as cause damage to the
machine. Always use proper handles
when moving the machine. Keep the
machine in a horizontal position on a
firm flat surface. Do not tilt. Do not use
the unit if it is damaged or poorly
adjusted. Never remove the machine
’s
coverings. Serious injury to the operator
or bystanders could result as well as
damage to the machine. Do not use this
unit for any job other than those for
which it is intended as described in this
manual. In start-up or during or after
operation of the engine, never touch hot
parts such as the muffler or the spark
plug. Do not operate the machine in the
rain or under wet conditions. Always
ensure all handles, guards and covers
are fitted when using the machine.
Always keep the machine away from
naked flame or sparks. Always stop the
engine or disconnect from mains before
cleaning / clearing a blockage or
checking, maintaining or working on the
machine. Before starting the pressure
washer, be sure you are wearing
adequate eye protection.
Transporting
The engine should be turned off, water
supplies disconnected and all hoses
removed when the machine is moved
between areas and when transporting or
storing the machine. Always turn off the
engine. When transporting in a vehicle:
properly secure your machine to prevent
turnover, fuel spillage and damage.
Fuelling
Fuel is extremely
flammable. Keep clear
of naked flames. Do not
spill any fuel
–
do not
smoke near fuel or the
machine.
Always shut off the engine before
refuelling. Do not fuel a hot engine
–
fuel
may spill and cause a fire. Open the fuel
cap carefully to allow any pressure
build-up in the tank to release slowly
and avoid fuel spillage. Fuel your
machine only in well ventilated areas. If
you spill fuel, wipe the machine
immediately
–
if fuel gets on your
clothing, change immediately. To reduce
the risk of serious or fatal burn injuries,
check for fuel leakage. If fuel leakage is
found, do not start or run the engine until
leak is fixed.
During Operation
Make sure you always have good
balance and secure footing. Always be
aware of your surroundings and stay
alert for possible hazards that you may
not hear due to the noise of the
machine. Never allow children to access
the machine. Avoid operating while
people, especially children or pets are
nearby. To reduce the risk of injury or
damage, do not allow any other persons
within a radius of 5 metres of your own
position. To reduce the risk of damage
to property, also maintain this distance
from other objects (vehicles, windows).
After Use
Always clean dust and dirt off the
machine
–
do not use any grease
solvents. Always keep the machine
clean, especially, the fuel tank, its
surroundings, and the air cleaner. After
the engine has stopped, the engine and
exhaust components will still be hot.
Never place the machine in any places
where there are flammable materials
such as dry grass, combustible gases or
combustible liquids etc. Let the engine
cool before storing the machine indoors.
Maintenance and Repairs
Service the machine regularly. Do not
attempt any maintenance or repair work
not described in this instruction manual.
Have all other work performed by a
servicing dealer. We recommend that
you have servicing and repair work
carried out exclusively by an authorised
service person. Before proceeding to
adjust or repair the machine, be sure to
stop the engine and detach the spark
plug. Never attempt to make engine
adjustments while the unit is running.
Always make engine adjustments with
the unit resting on a flat, clear surface.
Replace
any worn, damaged or
removed warning labels immediately. It
is recommended you complete formal
training on how to use your equipment
should you feel the need to do so.
Personal Safety
Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the
influence
of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result
in serious personal injury. Use personal
protective equipment. Always wear eye
protection. Protective equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.