Jet MPR-10HV, Operating Instructions And Parts Manual, Page: 8 / 16

8
9.0 Standard roll dimensions
Figure 9-1
10.0 Standard roll profiles and capacities
No. Profile type Tolerance range (in.) Minimum (in.)
1
Flat (hard)
0.78 x 0.19 7.5
1.181 x 0.39 19.685
2
Flat (easy)
0.78 x 0.19 6.25
1.96 x 0.39 15.748
3
Square Tube, solid
0.39 6.28
0.78 19.685
4
T-leg, out
1.181 x 1.181 x 0.157 15.748
1.37 x 1.37 x 0.177 23.622
5
T-leg, in
1.181 x 1.181 x 0.157 15.748
1.37 x 1.37 x 0.177 23.622
6
U-channel, in
1.181 x 1.181 x 0.177 19.685
1.574 x 0.787 x 0.196 27.559
7
U-channel, out
1.181 x 0.181 x 0.177 19.685
1.574 x 0.787 x 0.196 27.559
Table 1