MBS-823DGVI / MBS-827DGVI
9. Technical characteristics
9.1 Table of cutting capacity and technical details
MBS-823DGVI
Cutting capacity
Electric motor-blade rotation
1.1kW
Flywheel diameter
295mm
Blade dimensions
27x0,9x2460mm
Blade speed cutting
20~85 m/min
Opening vice
260mm
Saw frame tilting
40°
Working table height
900mm
Weight
280 kg
MBS-827DGVI
Cutting capacity
Electric motor-blade rotation
1.5kW
Flywheel diameter
380mm
Blade dimensions
27x0,9x3160mm
Blade speed cutting
20~85 m/min
Opening vice
355mm
Saw frame tilting
40°
Working table height
900mm
Weight
360 kg
9.2 Noise emission
Acoustic pressure level (EN 11202):
Idling
Lpa 71,0 dB(A)
Operating
Lpa 83,8 dB(A)
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended
to allow the user to make a better estimation of the
hazards and risks involved only.
10. Choosing the saw band
Choose a toothing that is appropriate to the workpiece being
processed. Ideally, at least 3 teeth should be in action at the
same time.
The toothing should not be smaller than necessary, as the
cutting speed is reduced if there are too many small teeth
working on the workpiece simultaneously, which causes the
saw band to wear more quickly, and makes the cuts crooked
and distorts them.
The following table shows the approximate toothing of the
saw bands for a specific material thickness. For further
information please contact your saw band dealer.
Comments
10/14 toothing provides good cutting results for thin-walled
pipes and profiles.
The choice of toothing (i.e. the number of teeth per inch)
should be such that at least 3 teeth are always in action at
the same time.
