3
WARNING
This paving breaker is designed and intended for use by properly trained and experienced
personnel only. If you are not familiar with the proper and safe operation of a paving breaker, do
not use until proper training and knowledge has been obtained.
•
Always wear approved impact resistant eye protection.
•
Always wear approved ear protection.
•
Always wear gloves and protective clothing.
•
Always direct the tool exhaust away from yourself and others.
•
Always disconnect the tool from the air supply when not in use.
•
Always check that the cutting chisel is securely latched in the tool before depressing the throttle
trigger.
•
Always hold the cutting tool down firmly on the work before depressing the throttle trigger.
•
Some dust created by power sanding, sawing, grinding, drilling and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
•
Lead from lead based paint
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
•
Your risk from those exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specifically designed to filter out microscopic particles
•
Do not operate tool while under the influence of drugs, alcohol or any medication.
Specifications
Model Stock
No.
Handle
Type
Shank
Size
Piston
Dia.
Piston
Stroke
Blows
per
Minute
Ft/Lb.
per Blow
@ 90 PSI
Overall
Length
CFM Air
Hose
ID
Net
lbs.
Ship
lbs.
PB-60-1-1/8 550075
“T”
1-1/8”x6” 2-1/4” 5”
1,400
88.97 25-3/8” 58
3/4”
66
72
PB-60-1-1/4 550076
“T”
1-1/4”x6” 2-1/4” 5”
1,400
88.97 25-3/8” 58
3/4”
66
72
PB-90-1-1/8 550077
“T”
1-1/8”x6” 2-5/8” 6-1/2” 1,250 180.83 28-1/2” 77 3/4” 92-1/2 101
PB-90-1-1/4 550078
“T”
1-1/4”x6” 2-5/8” 6-1/2” 1,250 180.83 28-1/2” 77 3/4” 92-1/2 101
The specifications in this manual are given as general information and are not binding. JWMH Tool
Group reserves the right to effect, at any time and without prior notice, changes or alterations to parts,
fittings, and accessory equipment deemed necessary for any reason whatsoever.
