6
4.
Machine specifications
4.1
Technical data
Table size(LxW)
623x623 mm
Table tilt
45
front, 15
back
Spindle speed
1400 rpm
Oscillations
60 /min
Oscillation stroke
38 mm
Sanding sleeve length
150‐230 mm
Max. workpiece height
80‐160 mm
Dust port diameter
100 mm
suction at 20 m/sec
560 m3/h
Overall (LxWxH)
623x623x995 mm
Table height
995 mm
Net weight
98 kg
Mains
1~230V, PE, 50Hz
Output power
0,75 kW (1HP) S1
Reference current
5.5 A
Extension cord (H07RN‐F):
3x1,5 mm²
Installation breaker protection
10 A
4.2
Noise emission
Declared emission values according to EN ISO 4871:
A‐weighted sound pressure level (LpA)
72.9 dB
Uncertainty
3 dB
A‐weighted sound power level (LwA)
86.1 dB
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is
intended to allow the user to make a better estimation
of the hazards and risks involved only.
4.3
Content of delivery
Most of the below items can be found on or inside
sander cabinet. Some items are shipped in the small
box which accompanies the machine. One table insert
comes installed on the table.
Refer to Figure 1.
1 Spindle sander (not shown)
6 Table inserts:
for 4” (100mm) rubber drum (at 90°) – A
for 2” (50mm) rubber drum (at 90°) – B
for 1/4" (6mm) and 3/8” (9mm) spindle (at 90°) – C
for 1/4” (6mm) ‐ 3/4” (19mm) spindle (at tilt) – D
for 1” (25mm), 1‐½” (38mm), 2” (50mm) rubber
drum (at tilt) – E
for 3” (75mm) and 4” (100mm) rubber drum (at tilt) – F
1 Rubber drum with sleeve 4” (100mm) – G
1 Rubber drum with sleeve 3” (75mm) – H
1 Rubber drum with sleeve 2” (50mm) – J
1 Rubber drum with sleeve 1‐½” (38mm) – K
1 Rubber drum with sleeve 1” (25mm) – L
1 3/4" (19mm) sleeve – M
1 3/4" (19mm) Spindle – N
1 5/8" (16mm) Spindle with sleeve – O
1 1/2 ” (12mm) Spindle with sleeve – P
1 3/8" (9mm) Spindle with sleeve – R
1 1/4” (6mm) Spindle with sleeve – S
1 Spindle hex nut – T
1 Combination wrench (with magnet strip) – U
1 Hex wrench 3mm, and magnet strip – V
1 Operating manual
1 Spare parts list.
Note: All provided sanding sleeves are 100 grit.
Additional grits are available – see parts breakdown.
Figure 1
