manualshive.com logo in svg

Jet JML-1014, Operating Instructions And Parts Manual

Share
Download
Jet JML-1014 Operating Instructions And Parts Manual Download Page 3

 

3 

Table of Contents 

 
Table of Contents ...............................................................................................................................3

 

Warning .............................................................................................................................................4

 

Specifications .....................................................................................................................................6

 

Optional Accessories Available ............................................................................................................6

 

Electrical Requirements ......................................................................................................................7

 

Unpacking ..........................................................................................................................................8

 

Assembly ...........................................................................................................................................8

 

Operations .........................................................................................................................................9

 

Tailstock Movement .........................................................................................................................9

 

On/Off Switch..................................................................................................................................9

 

Work Lamp (JWL-1220 only) ............................................................................................................9

 

Adjusting the Tool Rest.................................................................................................................. 10

 

Changing Spindle Speeds .............................................................................................................. 10

 

Belt Replacement .......................................................................................................................... 11

 

Removing and Installing Live Center ............................................................................................... 11

 

Index Pin ...................................................................................................................................... 12

 

Maintenance..................................................................................................................................... 12

 

Replacement Parts ........................................................................................................................... 12

 

JML-1014

I

 Mini Lathe.................................................................................................................... 13

 

Parts List for JML-1014

I

 Mini Lathe ................................................................................................ 14

 

JWL-1220 Lathe............................................................................................................................ 16

 

Parts List for JWL-1220 Lathe ........................................................................................................ 17

 

Electrical Connections for JWL-1220.................................................................................................. 19

 

 

 

 

Summary of Contents for JML-1014





















Reviews:

No comments

Brands by name

Popular brands

Load more brands