Jet JJP-8BT, Operating Instructions And Parts Manual

Page: 6 / 40

6
36. When working with a swirl grain wood or burls, making it necessary to plane against the grain, use a
lesser depth of cut and a slow rate of feed.
37. Move the hands in an alternate motion from back to front as the work continues through the cut.
Never pass the hands directly over the cutter knife. As one hand approaches the knives remove it
from the stock in an arc motion and place it back on the stock in a position beyond the cutter knife
(Fig. 2).
38. At all times hold the stock firmly.
39. Do not use this for other than it intended use. If used for other purposes, Walter Meier
(Manufacturing) Inc.disclaims any real or implied warranty and holds itself harmless for any injury or
damage which may result from that use.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
- - SAVE THESE INSTRUCTIONS - -
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury!