Jet JDS-12X-M, Operating Instructions Manual, Page: 5 / 26

Do not stand on the machine.
Connection and repair work on the electrical installation may be
carried out by a qualified electrician only.
Have a damaged or worn power cord replaced immediately.
Make all machine adjustments or maintenance with the machine
unplugged from the power source.
3.3 Remaining hazards
When using the machine according to regulations some
remaining hazards may still exist.
The moving sanding disc in the work area can cause injury.
Risk of kickback. The work piece is caught by the moving sanding
disc and thrown back to the operator.
Thrown work piece parts can lead to injury.
Sanding dust and noise can be health hazards. Be sure to wear
personal protection gear such as safety goggles and dust mask.
Use a suitable dust exhaust system.
Defective sanding discs can cause injuries.
The use of incorrect mains supply or a damaged power cord can
lead to injuries caused by electricity.
4. Machine specifications
4.1 Machine description
Fig 1
A ............ Motor
B ............ On/Off switch
C ............ Sanding disc
D ............ Disc brake
E ............ Disc safety guard
F ............ Table
G ............ Mitre gauge
H ............ Dust port
I ............. Base
J ............. Mounting holes (4x)
K ............ Table tilt control and lock knob
4.2 Technical data
Sanding disc diameter 305 mm
Table size (LxW) 435 x 215 mm
Table tilt 0° ‐ 45

Table tilt stops 0°; 22,5°, 45°
Disc speed 1430 rpm
Dust port diameter 57 mm
Suction at 20m/s 185 m³/h
Overall (LxWxH) 450x510x400 mm
Net weight 34 kg
Mains 1~230V, PE, 50Hz
Motor power 0,75 kW (1HP) S1
Reference current 4,6 A
Extension cord (H07RN‐F): 3x1,5 mm²
Installation fuse protection 10 A
Insulation protection class I