5
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance
procedures for a JET Model JBOS-5 Oscillating Spindle Sander. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown.
This machine has been designed and constructed to provide years of trouble free operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please contact
either your local supplier or Walter Meier. Walter Meier can also be reached at our web site:
www.waltermeier.com.
Specifications
Model Number ............................................................................................................................................ JBOS-5
Stock Number ............................................................................................................................................. 708404
Table Size (in.) ................................................................................................................................ 14-1/2 x 14-1/2
Table Tilt (deg.) .................................................................................................................................. 0 to 45 down
Height, without spindle (in.) ........................................................................................................................... 18-3/4
Base Footprint (in.) .......................................................................................................................... 11-3/4 x 11-3/4
Spindle Speed (RPM) .................................................................................................................................... 1,725
Oscillations per Minute ........................................................................................................................................ 30
Maximum Length of Oscillation (in.) ...................................................................................................................... 1
Oscillation Gear Environment .......................................................................................................... sealed oil bath
Dust Port outside diameter (in.) ............................................................................................................................ 2
Power Cord length (ft.) .................................................................................................................................... 5-1/2
Motor (TEFC) ............................................................................. TEFC Induction, 1/2 HP, 1PH, 110V, 60Hz, 7.5A
Switch ............................................................................................................... manual, with removable safety key
Net Weight (lb) .................................................................................................................................................... 77
Shipping Weight (lb) ............................................................................................................................................ 82
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior
notice, without incurring obligations.
Summary of Contents for JBOS-5
Page 11: ...11 Table Assembly for the JBOS 5...
Page 12: ...12 Base and Motor Assembly for the JBOS 5...
Page 15: ...15...
