7
Removing Spindles
Using the provided wrenches, loosen the spindle
nut (A, Fig. 5) clockwise while holding the spindle
housing flat (B, Fig. 5) with the other wrench.
Changing Sanding Sleeves
1/4", 1/2" and 5/8”
1.
Loosen the clamp (A, Fig. 6) with a cross
point screwdriver.
2.
Remove the sanding sleeve from the spindle
shaft.
1-1/2” and 2” (optional 3”)
1.
Loosen the nut (B, Fig. 6) with the provided
wrench.
2.
Remove the sanding sleeve from the spindle
shaft.
3.
Reverse these steps to install the new
sanding sleeves.
Replacement Sanding Sleeves
Part #
Size
Grit
575800 .........................1/4” .................. 100 Grit
575801 .........................1/4" .................. 120 Grit
575806 .........................1/2" ....................60 Grit
575807 .........................1/2" ....................80 Grit
575808 .........................1/2" .................. 100 Grit
575809 .........................1/2” .................. 120 Grit
575810 .........................5/8” ....................60 Grit
575811 .........................5/8” ....................80 Grit
575812 .........................5/8” .................. 100 Grit
575813 .........................5/8” .................. 120 Grit
575838 .........................1-1/2” .................60 Grit
575839 .........................1-1/2” .................80 Grit
575840 .........................1-1/2” ............... 100 Grit
575841 .........................1-1/2” ............... 150 Grit
575842 .........................2” .......................60 Grit
575843 .........................2” .......................80 Grit
575844 .........................2” ..................... 100 Grit
575845 .........................2” ..................... 150 Grit
3” Optional Accessories
575846.......3” ......................................... 60 Grit
575847.......3” ......................................... 80 Grit
575848.......3” ....................................... 100 Grit
575849.......3” ....................................... 150 Grit
709539.......3" ................................. Table Insert
709534.......3" ........................ Spindle Assembly
709538.......3" .............Rubber Drum and Sleeve
