background image

 

 

2

 

1.0

  IMPORTANT SAFETY 

INSTRUCTIONS 

1.1

  General power tool safety warnings 

WARNING: Read all safety warnings, instructions, 
illustrations and specifications provided with this 
power tool. 

Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious injury.

 

Save all warnings and instructions for future 
reference.  

The term “power tool” in the warnings refers to your 
mains-operated (corded) power tool or battery operated 
(cordless) power tool.

 

Work area safety 

 

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents. 

 

Do not operate power tools in explosive 
atmospheres, such as in the presence of 
flammable liquids, gases or dust.

 Power tools 

create sparks which may ignite the dust or fumes. 

 

Keep children and bystanders away while 
operating a power tool.

 Distractions can cause 

you to lose control. 

Electrical safety 

 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock. 

 

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded. 

 

Do not expose power tools to rain or wet 
conditions.

 Water entering a power tool will 

increase the risk of electric shock. 

 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords 

increase the risk of electric shock. 

 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of 
electric shock. 

 

If operating a power tool in a damp location is 
unavoidable, use a GFCI (ground fault circuit 
interruptor) protected supply.

 Use of a GFCI 

reduces the risk of electric shock. 

 

Personal safety 

 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do 
not use a power tool while you are tired or under 
the influence of drugs, alcohol or medication. 

moment of inattention while operating power tools 
may result in serious personal injury. 

 

Use personal protective equipment. Always 
wear eye protection.

 Protective equipment such as 

dust mask, non-skid safety shoes, hard hat, or 
hearing protection used for appropriate conditions 
will reduce personal injuries. 

 

Prevent unintentional starting. Ensure the 
switch is in the off-position before connecting to 
power source and/or battery pack, picking up or 
carrying the tool.

 Carrying power tools with your 

finger on the switch or energising power tools that 
have the switch on invites accidents. 

 

Remove any adjusting key or wrench before 
turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may 
result in personal injury. 

 

Do not overreach. Keep proper footing and 
balance at all times.

 This enables better control of 

the power tool in unexpected situations. 

 

Dress properly. Do not wear loose clothing or 
jewelry. Keep your hair, clothing and gloves 
away from moving parts.

 Loose clothes, jewelry or 

long hair can be caught in moving parts. 

 

If devices are provided for the connection of 
dust extraction and collection facilities, ensure 
these are connected and properly used.

 Use of 

dust collection can reduce dust-related hazards. 

 

Do not let familiarity gained from frequent use of 
tools allow you to become complacent and 
ignore tool safety principles.

 A careless action 

can cause severe injury within a fraction of a 
second. 

Power tool use and care 

 

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at the rate 
for which it was designed. 

 

Do not use the power tool if the switch does not 
turn it on and off.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be 
repaired. 

 

Disconnect the plug from the power source 
and/or remove the battery pack, if detachable, 
from the power tool before making any 
adjustments, changing accessories, or storing 
power tools.

 Such preventive safety measures 

reduce the risk of starting the power tool 
accidentally. 

 

Summary of Contents for JB-10P





















Reviews: