13
Figure 26: Sanding aluminum
Sanding outside curves on the belt unit with the
platen removed (see Figure 27).
Figure 27: Sanding outside curves
Polishing using the accessory felt belt in place of
the sanding belt (see Figure 28).
NOTE:
Most polishing operations are performed
with the platen removed.
Figure 28: Polishing using a felt belt
Sanding in tight areas with the sanding belt (see
Figure 29).
Figure 29: Sanding in tight areas
Inside curves can be sanded on the upper sanding
belt idler wheel (see Figure 30). The upper cover
can either be hinged back or removed.
Figure 30: Sanding inside curves