6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for the JET Model J-2210 and J-2230 Drill Presses. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web
site: www.wmhtoolgroup.com.
Specifications
Model:.....................................................................J-2210 ......................... J-2230-2 ......................J-2230-4
Stock Number .......................................................354205 ............................354206 ........................ 354207
Motor ...................................................... 2HP, 1Ph, 230V ..............2HP, 3Ph, 230V .......... 2HP, 3Ph, 460V
Drilling Capacity (in.)
Cast
Iron............................................................1-1/4 ............................... 1-1/4 ............................1-1/4
Steel ..................................................................1-1/8 ............................... 1-1/8 ............................1-1/8
Column Diameter (in.) .............................................4-5/16 ............................. 4-5/16 ..........................4-5/16
Maximum Dimension Spindle to Column (in.)...............11 ....................................11 ................................ 11
Spindle Taper........................................................... MT-3 ............................... MT-3 ............................MT-3
Spindle Travel (in.) ..........................................................5 ......................................5 .................................. 5
Spindle Dimension to Base (in.)..............................46-1/2 ............................. 46-1/2 ..........................46-1/2
Spindle Dimension to Table (in.).............................32-3/4 ............................. 32-3/4 ..........................32-3/4
Table Size (in.) ..........................................16-1/8 x 19-1/4 ............... 16-1/8 x 19-1/4 ............16-1/8 x 19-1/4
Number of T-slots.............................. 2 in table, 2 in base ........ 2 in table, 2 in base .....2 in table, 2 in base
Spindle Speed Range (RPM) ............60-450 & 240-1800 ...........60-450 & 120-900 ....... 60-450 & 120-900
....................................................................................N/A .......120-900 & 240-1800 ... 120-900 & 240-1800
Overall Height (in.) ........................................................73 ....................................73 ................................ 73
Base Size (in.)...........................................19-3/8 x 29-1/4 ............... 19-3/8 x 29-1/4 ............19-3/8 x 29-1/4
Table Travel (in.) .....................................................26-1/2 ............................. 26-1/2 ..........................26-1/2
Net Weight – approximate (lbs.) .................................660 ..................................660 .............................. 660
Shipping Weight – approximate (lbs.) .........................790 ..................................790 .............................. 790
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.
