Jet EQUIPMENT & TOOLS "W" Series, Operator'S Manual

Page: 3 / 16

3
WARNING
•
Read and understand the entire operator’s manual before using the pallet truck.
•
Do not place hands or feet under the pallet truck at any time.
•
Do not operate a loaded pallet truck on ramps or inclines.
•
Do not tip load pallet truck forks. This may cause damage to the forks and personal
injury if the rear of the pallet truck suddenly "pops up".
•
Never leave a loaded pallet truck unattended in the raised position. Always lower
load to the floor.
•
Do not load pallet truck beyond its rated capacity.
•
Secure load before transporting.
•
To prevent accidental tipping, make sure load is centered on the forks.
•
Do not move a loaded pallet truck by other than manual force.
•
Failure to comply with these warnings may result in personal injury and/or property
damage.
The specifications in this manual are given as general information and are not binding. JET Equipment
& Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts,
fittings, and accessory equipment deemed necessary for any reason whatsoever.