11
Filter Bag Kit Assembly
If you purchased Model DC-1200VX-BK1 or DC-1200VX-
BK3 Dust Collector, this section describes the assembly
and installation of the contents of the 30 Micron Filter Bag
Kit (SN 708636F). These instructions also apply to the
optional 5 Micron Filter Bag Kit (SN 708636MF).
Filter Bag Installation
Referring to Figure 8:
1. Place
the
hanger
(A) on the
hanger bracket
(B).
2. Slide
the
filter bag loop
(C) over the hanger hook.
3. Feed
the
retainer strap
(D) through the loops on the
filter bag
(E) and fasten to the
collector housing
(F).
Collector Bag Installation
Referring to Figure 9:
4. Insert the ring of the
collector bag
(A) at an angle into
the
housing
(B) through the opening at the bottom.
Pull down on the bag to make sure it “seats” in the
housing.
5. Position the plastic window in front so that you can
easily see when the collector bag is full.
After completing the filter bag and collector bag
installation, proceed to
Electrical Connections
.
Figure 8
Figure 9
