GB ‐ ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET‐product. This manual has been prepared for
the owner and operators of a
JET DC‐1200 dust collector
to promote safety during installation, operation and maintenance
procedures. Please read and understand the information contained in these operating instructions and the accompanying
documents. To obtain maximum life and efficiency from your dust collector, and to use it safely, read this manual thoroughly and
follow instructions carefully.
…Table of Contents
1. Declaration of conformity
2. JET Warranty
3. Safety
Authorized use
General safety notes
Remaining hazards
4. Machine specifications
Technical data
Noise emission
Contents of delivery
Unit description
5. Assembly and start up
Installation
Assembly
Dust collection
Mains connection
6. Machine operation
7. Maintenance and inspection
Cleaning filter
Changing collector bag
8. Trouble shooting
9. Environmental protection
10. Available accessories
1. Declaration of conformity
On our own responsibility we hereby declare that this product
complies with the regulations listed on page 2.
2. Warranty
TOOL France SARL guarantees that the supplied product(s)
is/are free from material defects and manufacturing faults.
This warranty does not cover any defects which are caused,
either directly or indirectly, by incorrect use, carelessness,
damage due to accidents, repairs or inadequate maintenance
or cleaning as well as normal wear and tear.
Further details on warranty (e.g. warranty period) can be
found in the General Terms and Conditions (GTC) that are an
integral part of the contract.
These GTC may be viewed on the website of your dealer or
sent to you upon request.
TOOL France SARL reserves the right to make changes to the
product and accessories at any time.
3. Safety
3.1 Authorized use
This dust collector is designed for sucking wood dust only. Any
other application is not permitted and may be carried out in
specific cases only after consulting with the manufacturer.
This dust collector is not suitable for sucking poisonous gases,
any liquids or foams, hot substances, easily flammable
substances.
Materials such as liquids, metal shavings, metal dust, screws,
glass, plastic or rock can cause sparks and/or damage when
coming into contact with any part of the dust collector.
The product is not suitable for use in wet or humid
environment.
Don’t use appliance in places with a risk of explosion.
The proper use also includes compliance with the operating
and maintenance instructions given in this manual.
The dust collector must be operated only by persons familiar
with its operation and maintenance and who are familiar with
its hazards.
The required minimum age must be observed.
The dust collector must only be used in a technically perfect
condition, with filter and collection bag in position.
Before connecting the dust collector to electric power, all
safety mechanisms and covers must be mounted.
In addition to the safety requirements contained in these
operating instructions and your country’s applicable
regulations, you should observe the generally recognized
technical rules concerning the dust collection on
woodworking machines.
Any other use exceeds authorization.
In the event of unauthorized use of the product, the
manufacturer renounces all liability and the responsibility is
transferred exclusively to the operator.
3.2 General safety notes
Woodworking machines can be dangerous if not used
properly. Therefore the appropriate general technical rules as
well as the following notes must be observed.
