Jet 751005, Operating Instructions And Parts Manual

Page: 3 / 20

3
•
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are
dangerous in the hands of untrained users.
•
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
•
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
Service
•
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
Additional
•
Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a “live” wire may make exposed metal parts
of the power tool “live” and shock the operator.
•
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
1.2 Specific safety warnings for plate
beveling machine
•
This beveling machine is designed and intended
for use by properly trained and experienced
personnel only.
If you are not familiar with the
proper and safe operation of a plate beveling
machine, do not use until proper training and
knowledge have been obtained.
•
Do not use this beveling machine for other than
its intended use.
If used for other purposes, JET
disclaims any real or implied warranty and holds
itself harmless from any injury that may result from
that use.
•
CALIFORNIA PROPOSITION 65 WARNING : This
product contains chemicals known to the State of
California to cause cancer, or birth defects or other
reproductive harm.
•
This product, when used for welding, cutting, or
working with metal, produces fumes, gases, or
dusts which contain chemicals known to the State of
California to cause birth defects and, in some cases,
cancer. (California Health and Safety Code Section
25249.5 et seq.)
•
Prevent unauthorized use of machine . When
machine is not being used, remove safety key from
on/off switch and store in safe location.
•
Feed workpiece against direction of cutter
rotation only
. Arrows are provided on the machine
and its accessories to help identify proper direction.
•
Only use blade inserts designed for the
cutterhead of the beveling machine
. Do not
attempt to modify the cutterhead or use inserts that
fail to comply with machine specifications. Make
sure all inserts are securely fastened in cutterhead
before operating machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious or possibly fatal injury.