JET
5
Tool specifications
Model
JAT-211, D-Handle Impact Wrench
Stock number
505211
Square drive
1 in.
Bolt capacity
1-7/16 in.
Anvil retainer type
Hog ring + pin hole
Impact mechanism
Twin hammer
Maximum torque
2200 lbf•ft (2982.8 N•m)
Working torque
380~1900 lbf•ft (515~2576 N•m)
Free speed
5500 RPM
Blows per minute
1400
Air consumption at 90psi
87.19 SCFM
Air consumption under load
49.28 SCFM
Air inlet
1/2 in. NPT
Air hose inside diameter
3/4 in.
Required air pressure
90 psi (621 kPa)
Vibration value
11.40 m/s
2
Sound power
1
118.5 dB(A)
Sound pressure
1
107.5 dB(A)
Power setting
3-position forward
3-position reverse
Grip
D-handle with inside trigger, + side handle
Overall Length
14.76 in. (375 mm)
Housing material
Aluminum alloy with composite shell
Net weight
14.90 lb. (6.75 kg)
Shipping weight
15 lb. (6.8 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
