manualshive.com logo in svg

Jet 350017, Operating Instructions And Parts Manual, Page: 23 / 32

Share
Download
Jet 350017 Operating Instructions And Parts Manual Download Page 23

 

 

23

* Contents of the Accessory Package: 

 
................. JMD18-020 ..............Cutter Arbor ........................................................................................... 1 
................. JMD18-022 ..............Handle................................................................................................... 4 
................. JMD18-039 ..............Handle Rod ........................................................................................... 3 
................. JMD18-040 ..............Knob ..................................................................................................... 3 
................. JMD18-050 ..............Lock Handle .......................................................................................... 1 
................. 561704 ....................Drill Chuck w/Chuck Key........................................................................ 1 
................. JMD18-086 ..............Cutter .................................................................................................... 1 
................. JMD18-021 ..............Chuck Arbor (Installed) .......................................................................... 1 
................. 365534 ....................Angle Vise ............................................................................................. 1 
................. JMD18-058 ..............Handle Crank ........................................................................................ 1 
................. JMD18-201 ..............Wheel ....................................................................................................  3 
................. TS-152704 ...............Hex Wrench .......................................................3mm ........................... 1 
................. TS-152705 ...............Hex Wrench .......................................................4mm ........................... 1 
................. TS-152706 ...............Hex Wrench .......................................................5mm ........................... 1 
................. TS-0209051 .............Hex Socket Cap Screw .......................................3/8x1 .......................... 1 
................. TS-0680041 .............Flat Washer ........................................................3/8 .............................. 1 
................. 365534-01 ...............Hardware Package(Hex Cap Screw,Nut,and Washer)............................ 2 

Summary of Contents for 350017

































Reviews:

No comments