Jet-Line Power Scooter, Operation Manual, Page: 7 / 18

7
4. COMMISSIONING
Overview Main Parts:
You receive your JET-LINE POWER SCOOTER already 95% pre-assembled – the
only thing you have to mount are the mirrors (simple rotary thread secured with
locknuts).
The JET-LINE POWER SCOOTER uses a throttle grip (on the right side of the
handle) to control the speed. Turn the throttle grip toward the seat to increase the
speed. If you turn the grip over, the speed slows down.
The higher the speed and the higher the weight, the lower is the maximum range of
the electric scooter. The main fuse under the seat protects the entire system from
overloading by excessive current flow. 60V DC to 12 DC voltage converters convert
the operating voltage to 12V. All lights and lamps use 12V voltage.
The alarm system (if present) is operated with 60V and is triggered by vibrations.
Although the alarm system consumes very little power, we recommend turning the
safety rocker switch OFF when the vehicle is not going to be used for a long time.
Battery compartment
under the running board Main switch in
the seat part