www.jetgroupbrands.com
To Expel Air Pockets
1) Free the follower rod from the grease tube assembly cap and
depress the vent valve when pushing the follower rod forward.
2) Squeeze the switch several times to operate gun until trapped
air is expelled. Push the follower rod into the grease tube
assembly.
INSPECTION, MAINTENANCE, AND CLEANING
1. WARNING: Make sure the switch is in its off position, and
unplug the charger from its electrical outlet before performing
any inspection, maintenance, or cleaning.
2. BEFORE EACH USE, check the general condition of the
grease gun. Check for misalignment or binding of moving
parts, cracked or broken parts, leaking battery pack,
damaged hose, and any other condition that may affect its
safe operation. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged
equipment.
3. Battery pack precautions: never burn batteries, as they can
explode in a fire. Do not charge leaking batteries. Only a
qualified service technician should perform maintenance on
the battery pack. Contact local solid waste authorities for
instructions on correct disposal or recycling of the battery pack.
4. Daily: Using a soft, dry cloth, remove all dirt, grease, and
debris from the exterior of the grease gun. Do not use
solvents to clean the grease gun.
5. When storing: always remove the battery pack from the
grease gun. Keep the grease gun and its accessories in a
clean, dry location and out of children’s reach.