Jet EQUIPMENT & TOOLS DC-1900C, Owner'S Manual, Page: 5 / 12

5
WARNING
Read and understand the entire contents of
this manual before attempting assembly or
operation of the dust collector!
Failure to comply may cause serious injury!
Unpacking
1. Remove all contents from the shipping
carton.
2. Report any damage to your distributor.
3. Do not discard any shipping material until
after the dust collector has been assembled
and is running properly.
Contents of the Shipping Cartons
Canister Filter Box (2)
1.
Canister Filter
1. Handle
1. Bag of Hardware for Handles
2.
M10 Hex Nuts
2. M10 Flat Washers
1. M10 Lock Washer
4. Knobs
DC-1900C
1.
Base
1. Owner's Manual
1. Warranty Card
1. Motor/Fan Assembly
10. Collector Bags
2.
Snap Rings
4. Casters
1. Inlet Port & Inlet Caps
2. Support Legs
1. Left Housing
1. Right Housing
2. Upper Gaskets
1. Lower Gasket
1. Connector Tube
1. Bag of Assembly Hardware
36. M8 x 20 Hex Cap Bolts
56. M8 Flat Washers
6.
M10 Flat Washers
8. M6 x 12 Pan Head Flange Bolts
26. M8 Hex Nuts
1.
3/16” x 1/2" Pan Head Flange Bolt
Tools Required for Assembly
2. 13mm Wrenches or Sockets
1. 14mm Wrench or Socket
1. #2 Cross Point Screw Driver
1. 17mm Wrench