JessEm.com FOR TECHNICAL SUPPORT CALL
1-800-436-6799
Pa
ge
4
10.
Install the dust box/table top assembly on a
stand following the directions provided with
the stand, and connect your dust collector to
the larger dust collection port. If you wish to
connect your fence to the dust collection
system, run a hose from the smaller upper
opening to the fence. Otherwise, plug this
port to maximize dust collector effectiveness.
x
11.
Install a router lift in the table (if you are not
using a Mast-R-Lift Excel). Insert a router into
your lift and, if using a JessEm Pow-R-Tek SR
Router, attach hoses between the router and
the dust box hose ports.
x
12.
Use four 10-32 x ¼” screws to attach the side
cover (Part #2). This panel gives better access
to put in and remove a router from your lift in
the future.
Note: Last two steps do not have pictures below
