Line up one of the caster wheel and bracket
s
to the holes on the stand leg. Using two (2)
M6 x 1
6
mm Socket Head Cap Screws and two (2)
6mm
Flat Washers mount the caster
wheel
to the stand leg and leave screws loose
as shown in Figure
1
2
and
1
3
.
** These will
be tightened at the very end once the stand is levelled **
(repeat one more time mounting the other caster wheel with bracket to the other stand leg.
Figure
1
2
.
Figure
1
3
.
Now that the support plate has been connected to the stand brace, tighten up the four (4)
M6 x 16mm screws on the roller wheel assembly as shown in Figure 11.
Figure
1
1
.
7
.
