IMPORTANT SAFETY PRECAUTIONS
! Before operating any machinery or
power tool, read and understand all
safety instructions in the owner’s
manual for the tool or machine.
! If you do not have a manual, contact
the manufacturer and obtain one
before using any tool or machine.
! Always wear eye protection in
compliance with ANSI safety
standards when operating any power
tools or machinery.
! Always use proper guards and safety
devices when operating power tools
and machinery.
! Carefully check router bits before
each use. Do not use if damage or
defect is suspected.
! Do not exceed the recommended
RPM for any router bit.
! Do not wear loose clothing or jewelry
that may catch on tools, machinery or
equipment.
! Unplug the tool or machine when
mounting or making any adjustments
to mechanical performance.
IMPORTANT RECOMMENDATIONS FOR
USING YOUR JESSEM MITE-R-SLIDE
The Sub-Fence (or white face) on the
Miter Fence is made of solid phenolic.
Phenolic is a synthetic material offering
superior strength and stability. We
recommend that you do not cut into the
phenolic sub-fence as the material is
very
hard and abrasive to carbide
cutting
tools.
It is best to remove the phenolic sub-
fence and use it as a template to create
your own sacrificial sub-fences from
MDF
or Plywood. Working with a
sacrificial
backer board will help reduce
chipping or
tear-out of the wood fibers
on the back
end of the workpiece.
Make sure the under carriage of the
Mite-R-Slide will clear the cutter and
all knobs are tightened and secure
before each use.
JESSEM TOOL LIMITED WARRANTY
All JessEm products are warranted to be free
from defects in material and workmanship.
JessEm will repair or replace any product which
upon inspection proves to be defective for a
period of (1) year from dated receipt and proof
of purchase. All warranty claims should be
made direct to JessEm Tool Company. Contact
JessEm for a warranty claim return authorization
and instructions to proceed. The consumer is
responsible for shipping costs to return product
to JessEm Tool Company. We will repair or
replace the product at our discretion and
JessEm Tool will return shipment to you at no
charge.
ROUTING SAFETY PRECAUTIONS
! Always make sure the fence on your
router table is locked firmly into
position before each use.
! Never force the bit or overload the
router beyond the expectations of the
tool.
! Be sure that at least 3/4 of the shank
length is inserted securely in the
router collet.
! Never bottom out the bit in the collet.
Allow 1/8” clearance between
bottom of shank and bottom of collet.
! Always rout in two or more passes
when large amounts of stock must be
removed.
! Use reduced RPM speeds for larger
diameter router bits.
WARRANTY LIMITATIONS
This warranty does not cover:
! Repairs or alterations made or attempted by
anyone other than JessEm Tool Company or
an authorized JessEm service professional.
! Normal wear and tear
! Abuse, misuse or neglect.
! Improper care or maintenance.
! Continued use after partial failure.
! Products that have been modified in any way.
! Products used with improper accessories.
! Premature thread wear due to adjusting
height with electric or cordless drill.
Summary of Contents for Mite R Slide
Page 17: ......
