JessEm Tool 02101A, Operating Instructions And Parts Manual, Page: 3 / 9

IMPORTANT SAFETY PRECAUTIONS

Before operating any router, read and understand all safety instructions in the
owner’s manual that came with the router.

If you do not have a manual, contact the manufacturer and obtain one before using
any power tool.

Always wear eye protection in compliance with ANSI safety standards when operating
any power tool.

Always use proper guards and safety devices when operating power tools and
machinery.

Carefully check router bits before each use. Do not use if damage or defect is
suspected.

Do not exceed the recommended RPM for any router bit.

Do not wear loose clothing or jewelry that may catch on tools or equipment.

Unplug the tool or machine when mounting or making any adjustments to mechanical
performance.
ROUTER SAFETY PRECAUTIONS

Never force the bit or overload the router beyond the expectations of the tool.

Be sure that at least 3/4 of the shank length is inserted securely in the router collet.

Never bottom out the bit in the collet. Allow 1/8” clearance between shank and bottom
of collet.

Always make sure the fence on your router table is locked into position before each
use.

Always rout in two or more passes when large amounts of stock must be removed.

Use reduced RPM speeds for large diameter bits.
DO NOT USE A CORDLESS DRILL TO RAISE
AND LOWER THE LIFT CARRIAGE. THE
AMOUNT OF FRICTION WILL CAUSE
PREMATURE WEAR OF THE THREADS.
CALIFORNIA PROPOSITION 65 WARNING
This product contains lead known to the State of California to cause cancer or
reproductive harm. Components made of brass are known to contain lead. Wash hands
after using this product.