INSTALLATION INSTRUCTIONS
DL-FLEX2-TILE
Instruction sheet subject to
change without prior notice
Rev 59
3/12/2020
Page 3 of 6
OPTION 2: Using Screws
All penetration through FLEXTILE must be made at the designated points marked by the circles on the sheet.
Note –
Recommended to use pan head, domed or round head screws. Do not fasten screws so much that it
deforms the LED Sheet
6.
Connect Power Supply
Connect the power connector to the LED sheet using one of the on-board connectors;
Connect the other end of the power connector to the power supply. If using hardwire power connectors, ensure the
wires are connected correctly by observing the polarity (positive to positive, negative to negative).
Note –
Connecting cables can be used to interconnect to LED sheets
