Jereh JES-HS60 User Manual Download Page 6

Page: 6 / 6

5. According to the assembly diagram, screw on the nozzle cap onto the sprayer

by rotating clockwise with the nozzle cap removal tool.

When replacing, to ensure the sealing effect, make sure that the black rubber pad is

coaxial with the nozzle. It is recommended to install the nozzle in the vertical

direction of the spray gun as shown below, which makes it easier to achieve that the

black rubber pad is coaxial with the nozzle.

6. Screw on the bottle, and the nozzle cleaning is completed.

Note

Always keep hands, components and all appliances clean in abovementioned

steps to prevent impurities from affecting the liquid pump performance.

Summary of Contents for JES-HS60

Page 1: ...1 JES HS60 Handheld Electrostatic Sprayer Filter Replacement Nozzle Cleaning USER GUIDE ...

Page 3: ...3 clean to prevent impurities from affecting the liquid pump performance 3 Screw on the bottle again and the filter replacement is completed ...

Page 4: ...the hose then take off the bottle remove the nozzle cap by rotating counterclockwise with the nozzle cap removal tool in accordance with the assembly diagram and then take out the nozzle 2 In accorda nce with the assembly diagram unscrew the nozzle core counterclockwise with a flat blade screwdriver ...

Page 5: ... needle especially those foreign matters in two grooves on the inner side of nozzle After scraping rinse the components in the nozzle assembly diagram with clean water 4 According to the assembly diagram screw on the nozzle core clockwise with a flat blade screwdriver ...