JENZI
- Wilhelm-Bahmueller-Str. 53 - D-73655 Pluederhausen - Germany, www.jenzi.com
EN - INSTRUCTION MANUAL Version 11/17
HEADLAMP CR4
ITEM-NR: 8241 003
1.
DESCRIPTION
1.1.
Scope of supply
•
Headlamp
1.2.
Technical data
•
The CR4 Headlamp operates on 3 batteries type Micro AAA 1,5V (Item-Nr. 8262 000)
•
Dimensions : 61x46x38 mm
•
Weight: 55g
2.
OPERATION & SETUP
2.1.
Insert batteries
Carefully open the battery compartment by pressing the release buttons at the sides of the lamp.
Insert batteries. Observe correct polarity. Close the battery compartment.
2.2.
Operation
Switch modes:
•
Press the switch for 2 Seconds to change between the different LED’s:
1. White Light
2. UV Light
3. Blinking Light
4. Off
•
Press the switch 1 quickly to use the dimmer or the blinking function.
•
Press the switch twice quickly in any gear to make the red lights blink.
3.
SAFETY NOTES
EN 62471 - Risk Group 1
•
Caution Possibly hazardous optical radiation emitted from this product. Do not
stare at operating lamp. May be harmful to the eyes.
•
Observe correct polarity. Batteries that have been inserted wrongly might destroy the device.
The guarantee will expire.
•
If you do not use the headlamp for a longer period of time, remove the batteries because
leaking battery liquid might damage the device.
4.
DISPOSAL
•
Electric and electronic products should not be deposed in household waste.
•
Dispose the device according to the statutory regulations of your country.
