JENZI
- Wilhelm-Bahmueller-Str. 53 - D-73655 Pluederhausen - Germany, www.jenzi.com
EN - INSTRUCTION MANUAL
Version 11/17
HEADLAMP CRS WITH MOTION SENSOR
ITEM-NR: 8241 002
1.
DESCRIPTION
1.1.
Scope of supply
Padded Box
3 Batteries type Micro AAA 1,5V
1.2.
Technical data
The CRS Headlamp operates on 3 batteries type Micro AAA
1,5V (ITEM-NR. 8262 000)
Dimensions : 50x45x65 mm
Weight: 63g
2.
OPERATION & SETUP
2.1.
Insert batteries
Carefully open the battery compartment by pressing the release button at the top of the lamp.
Insert batteries. Observe correct polarity. Close the battery compartment.
2.2.
Operation
Switch modes:
Press the red switch for manual operation:
1. Red LEDs
2. Red SOS Flashlight LEDs
3. White LED
4. Off
Press the transparent switch to activate the infrared (IR) sensor function of the white LED.
1. On
2. Off
The white LED can be switched on/off by waving a hand in front of the lamp. The standby mode
is shown by a red LED indicator in the transparent switch.
3.
GENERAL NOTES
To prevent the lamp to accidently switch on/off, the movement sensor has a limited range of
approx. 10cm.
You can manually adjust the ZOOM focus by moving it to the right and left.
4.
SAFETY NOTES
EN 62471 - Risk Group 1
Caution Possibly hazardous optical radiation emitted from this product. Do not
stare at operating lamp. May be harmful to the eyes.
Observe correct polarity. Batteries that have been inserted wrongly might destroy the device.
The guarantee will expire.
If you do not use the headlamp for a longer period of time, remove the batteries because
leaking battery liquid might damage the lamp.
5.
DISPOSAL
Electric and electronic products should not be deposed in household waste.
Dispose the device according to the statutory regulations of your country.
