12
Te
chnical User
GB
FOR FREE ADVICE ON THE USE OF THIS PRODUCT, PLEASE CONTACT OUR SALES SUPPORT TEAM
Jenx Limited, Wardsend Road, Sheffield, S6 1RQ. Tel: +44 (0)114 285 3376. Fax: +44 (0)114 285 3528. [email protected] www.jenx.com
Making & Using the Adjustments
Do not use
this product if you suspect it is faulty or broken.
Contact Jenx Limited immediately for advice. +44 (0) 114 285 3376
Never Leave your child unattended while using this product
Always secure the child by using all of the positioning straps and safety straps provided. Velcro
should overlap by at least 3 inches
(7.5 cm)
on all straps before you begin to make any other
adjustments. Ensure the safety strap and positioning strap are adjusted for each child and for
changes of clothing.
POSITIONING SUGGESTIONS GIVEN IN THIS SECTION SHOULD BE TREATED AS A GUIDE ONLY. YOU SHOULD
ALWAYS CONSULT YOUR THERAPIST OR MEDICAL PRACTITIONER BEFORE USING THIS PRODUCT.
WHY?
Adjust the shoulder support so the top edge is in line with the top of the
child’s shoulders and use the angle
adjustment to keep the support about 30mm from the child. This will help to prevent a child who extends
strongly from falling out.
The Shoulder Support.
HOW?
The height of the shoulder support can be adjusted by loosening the wingnut at the back of the post Fig 5.
and moving the shoulder support to the required height. Tighten afterwards. The angle of the shoulder
support can be adjusted by loosening the wingnut in the curved slot at the base of the post Fig 6. Tighten
when correct position is found.
WHY?
The Multigrip™
hip support adjusts for height, angle and forward & back. This means you can support the
child’s back at just the right angle to keep their hips in place. They can mould so the child is supported all
around giving them a very stable sitting base.
Multigrip
™
Hip Supports.
HOW?
These are designed to mould around your child’s hips
to offer maximum support when seated. To mould
around your child simply loosen the black knobs
which can be seen showing through the holes in the
multigrip cover Fig 7. Do not over-loosen them.
Adjust support to fit and tighten knobs again.
Fig 6
Fig 5
Fig 7
Summary of Contents for LADYBIRD
Page 17: ...17...
