2.3 CONTROLS
Print key - Provides a mode dependent printout - refer Section 7 for examples.
Cal key - performs a photometric calibration at the current wavelength.
Goto key - used to set wavelength.
used to select the displayed menu option and for entering values.
used to move horizontally and vertically between menu options. Up and down
arrow keys are also used to select non-numeric set up parameters.
Icons
The following icons may appear on the instrument display during operation.
UV lamp on (6405 only)
This icon will flash during pre-strike warm up.
Tungsten Halogen lamp alight. If the lamp(s) fail the symbol will
not be shown.
Current cell holder position in multi-cell holder (0 - 7).
0 = position 0 which is the default for blank.
Recalled scan in Spectrum mode or calibration curve in Quantitation
mode.
640 050/REV B/11-99
4