JensPrima innoCon 6800O, Operating Instruction, Page: 13 / 20

Optional ：℃, ℉
Optional ：Pt-1000, NTC-10K
Optional range：-5.0~5.0℃，30.0~41.0℉
Optional range：-10~120℃，14~248℉
innoCon 6800 Monitor Manual
Temperature System
1. Enter the configuration menu, select “Analysis System”and press “Enter”.
1. Enter the configuration menu, select “Analysis System”and press “Enter”.
2. Select “Temperature system” and press “Enter”.
2. Select “Measurement System” and press “Enter”.
Optional: ppb, μg/l, ppm, mg/l, %
Optional range: -10.0~10.0ppb (μg/l)，-1.00~1.00ppm(mg/l), -10~10%
3. After completion of setting, press “Enter”to save the setting, and then reture to previous menu.
3. After completion of setting, press “Enter”to save the setting, and then reture to previous menu.
Measurement System
Analysis System
Page 11
Temperature System
Temp. Unit: ℃
Pt-1000
+0.0℃
+025.0℃
Sensor Type:
Temp. Offset::
Manual Temp. :
1
▲
▲
Measurement System
Meas. Mode : ppb
+0.00ppb Offset:
1
▲
▲
1. Enter the configuration menu, select “Analysis System”and press “Enter”.
2. Select “Pressure” and press “Enter”.
Optional range: 0 ~ 1100 mBar
3. After completion of setting, press “Enter”to save the setting, and then reture to previous menu.
Pressure
Pressure
Pressure : 1013 mBar
1
▲
▲
1. Enter the configuration menu, select “Analysis System”and press “Enter”.
2. Select “Salinity” and press “Enter”.
Optional range: 0 ~ 99.9 ppt
3. After completion of setting, press “Enter”to save the setting, and then reture to previous menu.
Salinity
Salinity
Salinity : 0.0 ppt
1
▲
▲
www.jensprima.com