Jensen VM9726BT Operating Instructions Manual Download Page 92

Page: 92 / 140

NAV104

CHECKING ROUTE PARAMETERS AND

ACCESSING ROUTE RELATED FUNCTIONS

You can check different parameters of the route recommended by iGo primo.

1. If you are on the Map screen, tap

to return to the

Navigation menu.

2. In the Navigation menu, tap

3. The following pieces of information are displayed:

• The name and/or address of the destination.
• Warning icons (if any). They provide extra information about your route (e.g.

unpaved roads or toll roads to be taken).

•  The total time of the route.
•  The total length of the route.
•  Estimated delay calculated from traffic events on your route.
•  The symbol of the vehicle type used in route calculation.
•  The route planning method (e.g. Fast).

4. You have the following options on this screen (for detailed instructions on

how to use them, see the next chapter):

• Tap

to edit the route: to add or remove destinations or change

their sequence. You can also set a route start point other than your current

location. This can be useful to plan and save a future trip.

• Tap

to display the entire route on the map.

• Tap

to bypass a part of the route.

• Tap

to delete the active route.

• Tap

to open a list with more options like selecting from route

alternatives, changing route parameters, simulating the route, saving the

active route or loading a previously saved route.

• Tap

to return to the Navigation menu.

Summary of Contents for VM9726BT













































































































































Search results

Summary of Contents for VM9726BT

Reviews:

Related manuals for VM9726BT

Brands by name

Popular brands

Jensen VM9726BT, Operating Instructions Manual

Search results

Summary of Contents for VM9726BT

Reviews:

Related manuals for VM9726BT

Brands by name

Popular brands