manualshive.com logo in svg

Jensen VM9424BT, Operating Instructions Manual

Share
Download
Jensen VM9424BT Operating Instructions Manual Download Page 100

94

Horizon NavMate 5

Browsing the Map During Navigation

You can browse the map while navigating without interrupting the current route 
– you will still be guided through voice commands. 

•

To browse during navigation, touch (and hold) the screen to activate the 
Map Browsing feature. 

•

Press the 

 button to return to on-screen navigation.

Adding a Detour

If you are unable to complete the route as calculated, you can add a Detour to 
the route that will allow you to stay on track to your destination.

1.

To add a Detour while navigating, press the 

 button to view the “Edit 

Route” screen and then press 

Detour

.

2.

Press 

Detour

 to view the “Detour” screen.

3.

Choose a parameter for the Detour from the on-screen list.

4.

The NavMate software will recalculate the route based on your chosen 
Detour information.

Summary of Contents for VM9424BT




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands