Radial Engineering Ltd.
Jensen Twin-Servo 500
™
Module
True to the Music
®
1
1
3
4
5
6
2
7
8
FeaTure SeT
1.
10 SeGMeNT MeTer:
Custom designed cir-
cuit for greater VU meter accuracy.
2.
GaiN CoNTrol:
Dual gang pot simultane-
ously controls the dual 990 op-amp topology
for optimal gain at all settings.
3.
180°:
Reverses pins-2 and 3 at the output to
help phase align microphones when two chan-
nels are in stereo use.
4.
HiGH PaSS FilTer (HPF):
Gentle high-pass
filter may be inserted into the signal path to
reduce excessive low frequency content and
control resonance.
5.
PaD:
Reduces the input sensitivity by -15dB
when amplifying exceedingly high output
sources.
6. 48V:
Activates the 48V phantom power supply
for use with condenser microphones and ac-
tive direct boxes.
7. CoMBo iNPuT:
Combination balanced XLR
mic input and 1/4” instrument input is mounted
on front panel for ease of use.
8.
oMNiPorT:
Available when used with the
Radial Workhorse, the Omniport accesses a
hi-Z instrument input.
9.
JeNSeN Dual 990 oPaMPS:
100% discrete
audio signal path without any tone shifting ca-
pacitors.
10.
JeNSeN ouTPuT TraNSForMer:
The JT-
11-EM is linear from 2Hz~200kHz with less
than 0.001% distortion at 20Hz.
11.
GrouND liFT:
Set and forget rear panel
ground switch lifts the pin-1 ground at the XLR
input.
12.
JeNSeN MiC iNPuT TraNSForMer:
The
JT-16-PCJR is exceptionally quiet and linear
from 5Hz~50kHz with less than 0.06% distor-
tion at 20Hz.
9
12
10
11
Summary of Contents for Twin-Servo 500 series
Page 2: ......
