5
or scan function to find the SMPS-665.
•
Select "SMPS-665" from the device list when it appears on your device screen.
If required, enter the pass code “0000” to pair (link) the SMPS-665 with your
device.
•
After successfully pairing (linking) the Bluetooth enabled device, a short beep
tone is heard and the
Bluetooth indicator
remain lit.
2.
After turning on the SMPS-665, a tone will be heard and the unit will search for the
last paired device. The
Bluetooth Status Indicator
will flash blue. If the
SMPS-665 finds the last paired Bluetooth device, a beep is heard and the
Bluetooth Status Indicator
will stop flashing and remain lit.
3.
After successfully pairing (linking), you can begin playing music from your
Bluetooth enabled device wirelessly to the speaker.
4.
Press the
/ Volume -
Button
on the speaker to adjust to the
desired volume level.
5. If you want to pair with another Bluetooth device, repeat steps 1 to 4 above.
Notes:
1. Refer to manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to
model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play
the music through the speaker, even if paired (linked).
3. If you are pairing (linking) your computer to the SMPS-665 using Bluetooth,
you may need to set the speaker as your computer’s default sound device.
4. You may have problems with the Bluetooth relinking if you turn the SMPS-665
off, and then on again right away. Please wait 10 seconds after turning the
SMPS-665 off before turning it on again.
Using the SMPS-665 as a Hands-free Bluetooth Speakerphone
1. Link your cell phone to the SMPS-665 via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap the
Phone Button
on
the speaker to switch the incoming call from cell phone to the SMPS-665. A short
beep tone will be heard confirming the call is being answered. Complete your call
using the built-in microphone and speaker on the SMPS-665.
3. Press the
/ Volume -
Button
on the SMPS-665 to
obtain the
desired sound level.
4. To end the call, just tap the
Phone Button
on the SMPS-665 again. A short beep
sound will be heard and the call will end. If you are playing music from your cell
phone to the SMPS-665 before answering the call, the music will automatically
resume playing when you hang up.
5. To ignore an incoming call, simply press and hold the
Phone Button
on the
speaker for about 2 seconds, a short beep tone will be heard and the call will be
rejected.
Hang up with the SMPS-665
A quick press on the
Phone Button
will end the call in progress. A short beep tone
will be heard from the speaker confirming the call has ended.
Redialing the last number with the speaker
The speaker will automatically redial the last number you have dialed by tapping the
speaker
Phone Button
twice and long beep will heard.
Note:
This feature is phone dependent.
Re-linking to the cell phone
If your cell phone is already paired (linked) with the SMPS-665, but became unlinked
even with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the SMPS-665 and then turn it on again to re-link your cell phone. After