E6
SMPS-625.
3. Adjust the volume control on the speaker obtain the desired sound level.
4. To end the call, just tap the
PLAY/PAUSE
BUTTON
again on the SMPS-625.
A short beep sound will be heard and the call will end. If you were playing music
from your cell phone to the SMPS-625 before answering the call, the music will
automatically resume playing when you hang up.
5. To ignore an incoming call, simply press and hold the
PLAY/PAUSE
BUTTON
on the speaker for about 2 seconds, a beep sound will be heard and the call will
be ignored.
Note:
The sound level in hands-free mode is lower than music playing mode, so in
hands-free mode you may need to increase the volume level.
Hang up with the SMPS-625
A quick press on the PLAY/PAUSE
BUTTON will end the call in progress. A short
beep tone will be heard from the speaker confirming the call has ended.
Redialing the last number with the speaker
The speaker will automatically redial the last number you dialed by tapping the
speaker
PLAY/PAUSE
BUTTON
twice and long beep will heard.
Note:
This feature is phone dependent.
Re-linking to the cell phone
If your cell phone is already paired (linked) with the SMPS-625, but became unlinked
even with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the SMPS-625 and then turning it on again to re-link your cell phone.
After 3 seconds a beep will be heard and the
BLUETOOTH STATUS INDICATOR
will flash blue. After 2 more seconds, short beeps will be heard and the
BLUETOOTH STATUS INDICATOR
will stop flashing and remain lit (blue) and
a
short beep will be heard if the SMPS-625 and your cell phone were successfully
re-linked.
2. You can also re-link the speaker by using Bluetooth operation of your cell phone.
Please refer to operation manual of your cell phone for more information.
PLAYING MUSIC USING THE AUXILIARY INPUT
The speaker features an auxiliary audio signal input jack for connecting external
a
udio devices like MP3 players, CD players, iPhones or iPods (except iPod shuffle 3
rd
gen) and listen to them your through the speakers.
1. Use the audio cable
(included)
with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the AUX-IN jack on the SMPS-625 and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3.
Slide the
POWER OFF/BLUETOOTH AND AUX SWITCH
to Bluetooth and AUX
position.
4. Turn on your external audio device.
5. Press the VOLUME UP (+) / DOWN (-) button on the SMPS-625 to obtain the
desired volume level. Operate all other functions on the external device as usual.
NOTE:
1. If you are connected to the Line Out Jack of your external device then you only
need to adjust the volume control on the SMPS-625. If you’re connected to the
Headphone Jack of your external device, then you may need to adjust both the
volume control of your external device and the SMPS-625 to obtain the most
desirable volume setting.
2.
If you use
AUX IN
function when playing Bluetooth audio,
Bluetooth audio will
be temporarily disconnected when the audio cable is plugged in. Unplugging
the audio cable will resume Bluetooth audio. We suggest you turn off the
Bluetooth function to save battery power when playing music via AUX IN
