E-7
SETTING THE CLOCK TIME
In order for the clock to function properly
,
the clock must be set before using it for
the first time. The display will be flashing when you plug the unit in for the first time.
If the display is not flashing, and the unit is in standby mode, press and hold the
/
MEM / M + BUTTON
(#1) until the clock display begins to flash.
To set the time, follow the steps below:
1.
Tap the HOUR/
BUTTON (#2) repeatedly to set the correct hour. Press and
hold the button to increase the time faster.
2. After hour is set, tap the MIN/
BUTTON (#3) repeatedly to set the correct
minutes. Press and hold the button to increase the time faster.
3. Press the / MEM / M + BUTTON (#1) to confirm the time. The unit will
automatically save the setting and exit the time set mode if you do not tap the
/ MEM / M + BUTTON (#1) within 5 seconds.
Notes:
If the AM INDICATOR (#17) is ON, the time displayed is “AM”.
If the PM INDICATOR (#18) is ON, the displayed time is “PM”.
ALARM OPERATION
The QiCR-200 features a dual alarm clock.
To set the alarms:
1. While in standby mode, press and hold the / BUTTON (#7) to enter the
ALARM 1 time setting mode.
2. The alarm time display will flash.
3. Tap the HOUR/
BUTTON (#2) repeatedly to set alarm hour. Press and hold
the button to increase the time faster.
4. Tap the MIN/
BUTTON (#3) repeatedly to set the alarm minutes. Press and
hold the button to increase the time faster.
5. Tap the / BUTTON (#7) to confirm.
6. Follow the same steps to set ALARM 2 using the / BUTTON (#8).
SETTING WAKE TO ALARM, RADIO or OFF
1. While in standby mode, tap the / BUTTON (#7) repeatedly to set ALARM 1.
The alarm time will show on the display.
a. Wake to Alarm, ALARM 1 INDICATOR (wake to alarm) (#11) will light up.
b. Wake to Radio, ALARM 1 INDICATOR (wake to radio) (#12) will light up.
c. ALARM 1 Off, both WAKE to ALARM & RADIO indicators will be off.
2. Follow the same steps for ALARM 2 using the / BUTTON (#8).
3. When the alarm sounds, the corresponding alarm indicators will flash.
4. The alarm will continue to sound for one hour unless stopped by pressing the /
MODE BUTTON (#9).
5. The set alarm times will sound again at the same time the following day.
Note: If ALARM 1 and ALARM 2 are set to the same time, only ALARM 1 will sound.
