MSR7007
6
System Menu
1.
Press and hold
the
AUDIO/MENU
button (3) for more than 2 seconds to enter the system
menu. The first menu item, “Beep Tone”, will appear on the display.
2.
Press the
AUDIO/MENU
button repeatedly to navigate the system menu and select the
desired item.
3.
Use the
VOLUME
buttons (2) to adjust the selected menu item.
The following items can be adjusted:
•
Beep Tone (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are
selected).
•
Region (USA/EURO): Set frequency spacing for various regions.
•
Time Zone: Set the local time zone (used only for Sirius satellite mode).
•
DST (Observed/Not Observed): Set for Daylight Savings Time.
•
Clock (12Hr/24Hr): Select 12 or 24 hour display mode.
•
Brightness (Low/Mid/High): Adjust LCD brightness.
•
Contrast (Low/Mid/High): Adjust LCD contrast.
•
Pwr On Vol (0 – 40): Select an automatic turn-on volume.
•
iPod Auto (ON/OFF): Choose ”ON” to automatically detect and playback iPod when
connected or “OFF” to use the
MODE
button to select the iPod source.
•
WB Alert (ON/OFF): Choose “ON” to switch to Weatherband mode when NOAA weather
alerts are issued. (See “NOAA Weather Alert” on page 8.)
•
Alert PWR (AUTO/OFF): Select “Auto” to turn on the radio when NOAA alerts are issued.
This function only works when the +12V switched is on.
•
Low Battery Alarm (ON/OFF): Monitor voltage on +12 volts switched line.
•
Default Set (NO/YES): Choose “YES” to return the EEPROM to factory default set up
values.
LOW BATTERY Operation
If LOW BATT is set to “ON”, a alarm will sound (8 beeps every 30 sec) when the voltage drops
to 10.8V (+/- 0.03V). A visual warning (LOW BATT) will appear flashing (8 flashes every 30
sec) in the lower left corner of the LCD display.
NOTE: “OFF” is the default setting for LOW BATT. If the audio is muted or the volume is
set to 0, the audible beep will not be heard.
Equalizer
Press the
EQ/LOD
button (11) to choose one of the following pre-defined bass and treble
curves: OFF > FLAT > ROCK > POP > CLAS(SIC).
Loudness
Press and hold
the
EQ/LOD
button (11) toggle loudness on/off. When listening to music at low
volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.
Auxiliary Input
To access an auxiliary device:
1.
Connect the portable audio player to the AUX IN cables on the back of the radio.
2.
Press the
MODE
button (4) to select AUX mode.
3.
Press
MODE
again to cancel AUX mode and go to the next available playback mode.
Liquid Crystal Display (LCD)
The current frequency and activated functions are shown on the LCD panel (21).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the numbers on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a normal range.
Setting the Clock
To set the clock to display the current time, turn the vehicle ignition on and turn the radio off.
Press and hold
the
DISP/SCROLL
button (12) for more than one second, and the time will
flash in the display. Press the
TUNE/TRK |<<
button (19) to adjust the hours or the
TUNE/TRK
>>|
button (18) to adjust the minutes. “AM” or “PM” will appear on the display to indicate AM or
PM. When no adjustment is made for five seconds, the time will become set and normal
operation will resume.
Scroll
When the information is too long to be displayed on the LCD,
press and hold
the
DISP/
SCROLL
button (12) to view the entire title. The information will scroll twice and then return to
abbreviated text.
