Jensen MS3A, Owner'S Manual

Page: 3 / 16

3
MS3A
INTRODUCTION
Thank for choosing a Jensen product. We hope you will find the instructions in this owner
’s manual clear and easy to follow. If
you take a few minutes to look through it, you
’ll learn how to use all the features of your new Jensen receiver for maximum
enjoyment.
Features

Waterproof iPx6

UV and Corrosion Resistant

AM/FM Tuner

12 Programmable Presets (6 AM, 6 FM)

USB MP3/WMA Player

Rear Auxiliary Audio Output

4-Channel Amplified Audio Output

Bluetooth (Supports A2DP and AVRCP)

APP Ready
Box Content

MS3A Radio

Radio Mounting Bracket

Screw Posts (x2)

Locking Hex Nuts (x2)

Washers (x2)
Compliance with FCC Rules
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against Harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THESE EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.
Compliance with FCC Rules (U.S.A. Only)
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC WARNING

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.

Proper connections must be used for connection to a host computer and/or peripherals in order to meet FCC emission
limits.